- Antifog Marker
- Apply to your lenses
- Made for swimmers who want to get rid of fog in their goggles and extend their life.
- Do your goggles keep fogging up? With this marker you will be able to swim without fog again and keep your favourite swimming goggles.
Made for swimmers who want to get rid of fog in their goggles and extend their life.
Do your goggles keep fogging up? With this marker you will be able to swim without fog again and keep your favourite swimming goggles. Effective for 1 to 3 hours between each application.
HOW TO USE
Apply to your lenses (please note they must be completely dry) 2) Leave to dry for at least 1 minute 3) Immerse the goggles in water to spread the product Re-apply on average every 1 to 3 sessions, depending on the speed of reappearance of the fog. 400 applications on average. If your goggles fog up during the session, dip them in the water again, a protective film will reform and allow you to finish your session in good conditions.
DO NOT USE ON NEW GOGGLES, they feature an anti-fog coating applied during production, you will risk damaging it and scratching the lenses. Never touch the inside of the lenses - Do not rub them! If you have rubbed your goggles before using the product, there is a strong possibility that the product may not work properly. The goggles must be dry before applying the product Do not use with contact lenses Must not be used by children
When used according to our recommendations for use, this product does not pose a risk to the health of users. We conducted independent laboratory tests and then usage tests on a panel of swimmers to ensure product conformity. In case of eye contact, rinse with clear water for several minutes. If eye irritation persists, consult a doctor and have the product container at hand. CAREFULLY READ THE INSTRUCTIONS BEFORE USING THE PRODUCT
COMPOSITION OF THE LIQUID
Water 70 - 80% Propylene glycol butyl ether 1 - 10% Ethanol 1-10% Fluoroaliphatic oxyethylene 1-10% Potassium hydroxide 0 - 0.5% Magnesium lauryl sulfate 0 - 0.5%
COMPOSITION Main part : 100.0% Polypropylene (PP) Cap : 100.0% Polypropylene (PP) Foam : 100.0% Polyester (PES) Blade (for knife) : 100.0% Polyamide
After drying, put your goggles back in a box or pouch between your sessions. Important: Never touch the inside of the lenses so as not to destroy the anti-fog coating.
- 1 x Nabaiji Swimming Goggles Anti-fog Marker 3ml
What's in the box
1 x Nabaiji Swimming Goggles Anti-fog Marker 3ml